Key points of carbon fiber reinforcement construction:

Reinforcement design → Concrete surface treatment → Preparation of leveling adhesive, application of scraping and leveling → Preparation and application of base adhesive → Preparation of impregnating adhesive, bonding of carbon fiber cloth → Curing and curing → Quality inspection

Carbon fiber adhesive has the characteristics of low viscosity, high strength, good wetting and permeability, strong thixotropy, and good construction performance

1. The cured adhesive layer has excellent physical, mechanical, and toughness properties

2. Good aging resistance and medium resistance (acid, alkali and water)

3. Low shrinkage during room temperature curing and hardening process

4. The proportion of ingredients is wide, and the curing time can be adjusted appropriately according to environmental needs

5. Free of volatile solvents, safe and non-toxic, easy to construct

Precautions for carbon fiber adhesive:

1. The construction environment should be ventilated and dry, with clean and oil-free adhesive surfaces.

2. The curing temperature shall not be lower than 5 ℃, and the curing time shall not be less than 3 days when the ambient temperature is 20-25 ℃. The curing time shall not be less than 7 days when the average temperature is 10 ℃.

3. During construction, protective equipment such as gloves, masks, and goggles must be provided.

If accidentally touched on the skin or clothing, it can be washed with acetone and rinsed with plenty of water.

If accidentally consumed or splashed into the eyes, seek medical attention immediately.